Home › Repairs › Rear Wheel Bearing

Rear Wheel Bearing cost

Rear Wheel Bearing on a BMW E90/E92/F30/F32 typically costs $414–$491 at an independent shop, $800 at a BMW dealer, or about $92 in parts DIY, based on 4 real owner-reported prices.

Last updated October 16, 2026 · Sources: 4 owner-reported prices from 1 cited thread

Pressed-in rear wheel bearing on RWD/xDrive 3 Series. Real prices reported by owners on Reddit and BMW forums, with a link to every one.

AllE90 E92 F30 F32

Typical cost

BMW dealer

$800

Median $800 · 1 data point

Independent shop

$414 – $491

Median $453 · 2 data points

DIY (parts/tools)

$92

Median $92 · 1 data point

Ranges are the lowest and highest prices in the table below. They are not estimates. Shop prices include parts and labor unless noted.

Every price we found

Price	Where	Details	Source
$491	Indy	Tire shop quote, 4 hrs labor, 335i	[1]
$414	Indy	Paid, aftermarket bearing, right rear (OEM would have been $470)	[1]
$800	Dealer	Dealer quote	[1]
$92	DIY	Bearing ($84) + collar nut ($8) from an online BMW dealer	[1]

One indy in the source thread charged $89/hr and billed 4 hrs for this job.
Seized half shafts are common; one DIYer gave up after two days and paid the indy labor.

How long it takes

2.5–4 hrs at an indy in these reports. With the BMW puller tool no alignment is needed; pulling the whole carrier means an alignment.

Which cars are affected

E9x 3 Series (325i/328i/335i) and similar. Rear bearings are pressed in and can be bought separately; fronts are bolt-on hub assemblies (see Front Wheel Bearing).

Symptoms

Humming or growling that rises with speed
Play when rocking the rear wheel
Noise changes when turning

Parts list

Rear wheel bearing (FAG / SKF)	ECS Tuning Pelican Parts Amazon
Rear axle collar nut	ECS Tuning Pelican Parts Amazon
Rear wheel bearing puller / press tool	ECS Tuning Pelican Parts Amazon

Check fitment for your exact car (VIN) before ordering. Links may become affiliate links in the future.

Had this done? Share what you paid

Your price helps the next owner judge a Rear Wheel Bearing quote. We check every submission before adding it.

Form not showing? Open the price form.

Common questions

How much does Rear Wheel Bearing cost?

Rear Wheel Bearing on a BMW E90/E92/F30/F32 typically costs $414–$491 at an independent shop, $800 at a BMW dealer, or about $92 in parts DIY, based on 4 real owner-reported prices.

How much does Rear Wheel Bearing cost at a BMW dealer?

Real dealer prices we found ranged $800 (1 data point, median $800).

How much does an independent shop charge for Rear Wheel Bearing?

Independent shop prices ranged $414 to $491 (2 data points, median $453).

Can I do Rear Wheel Bearing myself?

Owners who did it themselves reported $92 in parts and tools.

How long does Rear Wheel Bearing take?

2.5–4 hrs at an indy in these reports. With the BMW puller tool no alignment is needed; pulling the whole carrier means an alignment.

Which BMWs are affected?

E9x 3 Series (325i/328i/335i) and similar. Rear bearings are pressed in and can be bought separately; fronts are bolt-on hub assemblies (see Front Wheel Bearing).